Combined use of a facial scanner and an intraoral scanner to acquire a digital scan for the fabrication of an orbital prosthesis. H Liu, S Bai, X Yu, Y Zhao.

3dMD Customer Research, Dental, Medical, 3dMDface, Craniofacial/Cleft, Oral and Maxillofacial, Plastics, Prosthetics, 3dMDface System

Date: March 2019. Source: The Journal of Prosthetic Dentistry, Volume 121, Issue 3, Pages 531-534. Abstract: For a patient with a unilateral orbital defect, an esthetic orbital prosthesis plays an essential role in enhancing quality of life. This technique describes the combined use of a facial scanner and an intraoral scanner to acquire the digital…

Standardization of Cranial Index Measurement in Sagittal Craniosynostosis. SZ Al-Shaqsi, AM Rai, C Forrest, J Phillips.

3dMD Customer Research, Medical, 3dMDhead, Craniofacial/Cleft, Plastics, 3dMDhead System

Date: March 2019. Source: Journal of Craniofacial Surgery, Volume 30 – Issue 2 – p 366-369. doi: 10.1097/SCS.0000000000005034. Abstract: Cranial index is a widely used 2-dimensional measure of skull form. It has traditionally been calculated as a ratio of the maximal cranial width divided by the maximal skull length. Nevertheless, the points of maximal skull…

3D symmetry of pre-operative breasts in cancer patients [abstract]. KM Nicklaus, AL Cheong, J Liu, GP Reece, MC Bordes, SE Hanson, MK Markey and FA Merchant.

3dMD Customer Research, Medical, Plastics, 3dMDtorso System, 3dMDthorax

Date: February 2019. Source: Proceedings of the 2018 San Antonio Breast Cancer Symposium; 2018 Dec 4-8; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2019;79(4 Suppl): Abstract nr P5-16-15. Objective: Achieving breast symmetry and mitigating ptosis are important aims of cosmetic and reconstructive breast surgery. Breast asymmetry typically occurs when the left and right breasts…

Recurrence of the Anterior Open Bite After Orthognathic Surgery: 3D Analysis of Dental, Soft Tissue, Skeletal and Airway Changes in Unraveling the Aetiology of Relapse. Suttorp et al.

3dMD Customer Research, Dental, Medical, 3dMDface, Oral and Maxillofacial, Orthodontics, Orthognathic, Plastics, 3dMDface System

Date: December 2018. Source: Oral Health Case Reports 2018, 4:2, DOI: 10.4172/2471-8726.1000148. Abstract: Several treatment approaches have been used to correct anterior open bites, but high relapse rates are reported. This report shows the orthognathic surgical correction of a severe anterior open bite of a 23 years old woman with a mouth breathing habit. Although…

Nasolabial shape differences and esthetics in unilateral cleft lip and palate: A comparison of nasolabial shape using a mean 3D facial template. MA Kuijpers, TJ Maal, JW Meulstee, CE Carels, EM Bronkhorst, SJ Bergé, PS Fudalej.

3dMD Customer Research, Dental, Medical, 3dMDface, Oral and Maxillofacial, Orthodontics, Orthognathic, Plastics, 3dMDface System

Date: November 2018. Source: 3D imaging in patients with orofacial clefts. Chapter 6. Objective: To determine the amount of deviation in nasolabial shape in patients with a cleft, compared with an average non-cleft face, and assess whether this difference was related to nasolabial esthetics. Methods: 3D stereophotogrammetric images of 60 patients with a unilateral cleft…

Anatomic approximation approach to correction of transverse facial clefts. RW Tse, RJ Knight, DM Fisher.

3dMD Customer Research, Dental, Medical, 3dMDhead, Craniofacial/Cleft, Oral and Maxillofacial, Orthodontics, Plastics, 3dMDhead System

Date: November 2018. Source: Journal of Plastic, Reconstructive & Aesthetic Surgery, Volume 71, Issue 11, pp 1600-1608. Abstract: Transverse clefts of the oral cavity have significant impacts on both appearance and function. Many methods of repair have been described, but there is no consensus on optimal approach. In addition, dissatisfaction with scars, distortion of appearance,…

Potential of 3D Surface Imaging for Quantitative Analysis of Fat Grafting. MK Markey, F Merchant, GP Reece et al.

3dMD Customer Research, Medical, Computer Science, Plastics, 3dMDtorso System, 3dMDthorax

Date: October 2018. Source: 9th 3DBODY.TECH Conference and Expo. October 16-17, 2018. Lugano, Switzerland, USA. Presenter: Mia K Markey Session: Technical Session 3: 3D Face & Body Scanning in Medicine Abstract: Autologous fat grafting is increasingly employed to address volume asymmetry and contour irregularity following breast reconstruction for breast cancer. However, there are no well-established…

Both the Observer’s Expertise and the Subject’s Facial Symmetry Can Affect Anatomical Position of the Head. PH Sutton, J Gateno, JD English, J Paranilam, JF Teichgraeber, JJ Xia.

3dMD Customer Research, Dental, Medical, 3dMDface, Craniofacial/Cleft, Oral and Maxillofacial, Orthodontics, Plastics, 3dMDface System

Date: October 2018. Source: Journal of Oral and Maxillofacial Surgery. Purpose: It is easier for us to judge facial deformity when the patient’s head is in anatomic position. The purposes of this study were to determine: 1) if a group of expert observers agree more than a group of non-experts on what is the correct…

Regression of cephalic index following endoscopic repair of sagittal synostosis. NA Pickersgill, GB Skolnick, SD Naidoo, MD Smyth, KB Patel.

3dMD Customer Research, Dental, Medical, Size & Fit | Wearable Tech | Apparel | Product Design, 3D Printing, 3dMDhead, Size & Fit, Craniofacial/Cleft, Multimodal (CT/CBCT), Plastics, 3dMDhead System

Date: October 2018. Source: Journal of Neurosurgery: Pediatrics [Online Before Print]. Objective: Metrics used to quantify preoperative severity and postoperative outcomes for patients with sagittal synostosis include cephalic index (CI), the well-known standard, and the recently described adjusted cephalic index (aCI), which accounts for altered euryon location. This study tracks the time course of these…

Applications and limitations of using patient-specific 3D printed molds in autologous breast reconstruction. S Hummelink, AC Verhulst, TJJ Maal, DJO Ulrich.

3dMD Customer Research, Medical, Size & Fit | Wearable Tech | Apparel | Product Design, 3D Printing, Size & Fit, Plastics, 3dMDtorso System, 3dMDthorax

Date: October 2018. Source: European Journal of Plastic Surgery, Volume 41, Issue 5, pp 571–576. Background: Over the last years, several techniques have been proposed to improve the outcome of autologous breast reconstruction procedures. One of these innovations describes patient-specific, three-dimensional (3D) printed breast molds for intraoperative use based on 3D stereophotogrammetry. In this article,…