The course of positional cranial deformation from 3 to 12 months of age and associated risk factors: a follow-up with 3D imaging. H Aarnivala, V Vuollo, V Harila, T Heikkinen, P Pirttiniemi, L Holmström, AM Valkama.

3dMD Customer Research, Computer Science | Computer Vision, Medical, Size & Fit | Wearable Tech | Apparel | Product Design, 3D Printing, 3dMDhead, Morphometrics, Size & Fit, Craniofacial/Cleft, Plastics, Prosthetics, 3dMD Systems, 3dMDhead System

Date: September 2016. Source: European Journal of Pediatrics, pp 1–11. doi:10.1007/s00431-016-2773-z. Abstract: Deformational plagiocephaly is reported in up to 46.6 % of healthy infants, with the highest point prevalence at around 3 months of age. Few prospective studies on the natural course of skull deformation have been conducted, and we know of no studies using…

3D Workflows in Orthodontics, Maxillofacial Surgery and Prosthodontics. Wicher J. van der Meer.

3dMD Customer Research, Dental, Genetics, Medical, 3dMDface, Craniofacial/Cleft, Multimodal (CT/CBCT), Oral and Maxillofacial, Orthodontics, Prosthetics, 3dMDface System, 3dMDtrio System

Date: 2016 Source: PhD Thesis Abstract: 3D workflows should result in clinical procedures that help clinicians to get better results with less effort and at lower costs. In other words, the 3D technology should make complex and difficult clinical procedures simpler and easier with reduced costs for healthcare. If 3D workflows are available with a…

Correction of nasal deformity in infants with unilateral cleft lip and palate using multiple digital techniques. Y Zheng, DP Zhang, T Qin, GF Wu.

3dMD Customer Research, Medical, Size & Fit | Wearable Tech | Apparel | Product Design, 3D Printing, 3dMDface, Size & Fit, Craniofacial/Cleft, Prosthetics, 3dMDface System

Date: December 2015. Source: Journal of Prosthetic Dentistry. Abstract: Presurgical correction of severe nasal deformities before cheiloplasty is often recommended for infants with cleft lip and palate. This article describes an approach for the computer-aided design and fabrication of a nasal molding stent. A 3-dimensional photogrammetric system was used to obtain the shape information of…

Multidimensional esthetic evaluation of patients with a cleft lip and palate wearing a maxillary partial removable dental prosthesis: A 5-year retrospective study. Yu D, Xing G, Nie P, Zhang X, Steve Shen G.

3dMD Customer Research, Medical, 3dMDhead, Craniofacial/Cleft, Prosthetics, 3dMDhead System

Date: November 2015 Source: Journal of Prosthetic Dentistry. [Epub ahead of print] Statement of Issue: No published quantitative or qualitative studies are available of the 2-dimensional (2D) and 3D esthetic evaluation of patients with a cleft lip and palate (CLP) wearing a maxillary partial removable dental prosthesis (MPRDP). Purpose The purpose of this retrospective clinical…

Application of Computer-Assisted Design and Manufacture in Unilateral Alloplastic Microtia Reconstruction, H Chen, ZC Chen.

3dMD Customer Research, Human Factors | Anthropometric, Medical, 3D Printing, 3dMDhead, Anthropometric, Plastics, Prosthetics, 3dMDhead System

Date: September 17, 2015. Source: 16th Congress of International Society of Craniofacial Surgery (ISCFS) 2015. Presenter: Hsin-Yu Chen. Background: The advances in 3D scanning, computer-assisted design and manufacture (CAD/CAM), and rapid-prototyping technology make customizing a symmetric auricular framework feasible for unilateral microtia patients. In this study, we used an active stereo-photogrammetry system to acquire the…

Precision of 3dMD in Anthropometry of the Auricle and its Application in Microtia Reconstruction, SH Mao, ZC Chen.

3dMD Customer Research, Medical, Size & Fit | Wearable Tech | Apparel | Product Design, 3D Printing, 3dMDface, 3dMDhead, Size & Fit, Plastics, Prosthetics, 3dMDface System, 3dMDhead System

Date: September 17, 2015. Source: 16th Congress of International Society of Craniofacial Surgery (ISCFS) 2015. Presenter: Shih-Hsuan Mao. Method: A total of 20 normal adult ears were included in this study. Thirteen anthropometric measurements were taken, twice by two plastic surgeons using Direct Measurement (DM) and through images captured via 3dMD. The purpose was to…

A Morphable Profile Model of the Human Head as an Outcome Tool for Craniosynostosis Surgery, C Duncan, R Armstrong, NE Pears.

3dMD Customer Research, Computer Science | Computer Vision, Human Factors | Anthropometric, Medical, 3dMDhead, Anthropometric, Computer Science, Morphometrics, Craniofacial/Cleft, Plastics, Prosthetics, 3dMDhead System

Date: September 15, 2015. Source: 16th Congress of International Society of Craniofacial Surgery (ISCFS) 2015. Presenter: C Duncan. Introduction: Outcome analysis in craniosynostosis surgery is difficult and often relies on limited anthropometric measurement, qualitative analysis of photography or patient reported outcome. Quantifiable morphable models of the human face have been described but, to date, a…

Facial Scanning With a Digital Camera: A Novel Way of Screening for Primary Angle Closure. HKY Choi, W Lin, SC Loon, C Tan, W Wong, J See, Z Gu, CK Kwoh, P Chew.

3dMD Customer Research, Dental, Medical, 3dMDface, Oral and Maxillofacial, Otolaryngology, Prosthetics, 3dMD Systems, 3dMDface System

Date: September 2015 Source: Journal of Glaucoma, Volume 24 – Issue 7 – p 522–526. Purpose: We hypothesize that patients with primary angle closure (PAC) have common significant facial characteristics that set them apart from an age-matched, sex-matched, and race-matched control population. The primary objective of this study was to test whether a 3-dimensional (3D)…

The Use of 3D Imaging in Craniosynostosis; Surgical Planning; and Follow-Up. T Maal.

3dMD Customer Research, Dental, Medical, 3dMDhead, Computer Science, Craniofacial/Cleft, Oral and Maxillofacial, Plastics, Prosthetics, 3dMDhead System

Date: June 24, 2015. Source: European Craniofacial Congress 2015, Gothenburg, Sweden. Presentation: The Use of 3D Imaging in Craniosynostosis; Surgical Planning; and Follow-Up. Presenter: Thomas J Maal, 3D Lab, Department of Oral- and Maxillofacial Surgery, Radboud University Medical Centre, Nijmegen, Netherlands.

A Solution to Face-to-Face Contact in Tele-Presence Systems. X Zhou, P Boulanger.

3dMD Customer Research, Dental, Genetics, Medical, 3dMDface, Computer Science, Craniofacial/Cleft, Oral and Maxillofacial, Orthodontics, Orthognathic, Plastics, Prosthetics, 3dMDface System

Date: June 2015 Source: 2015 12th Conference on Computer and Robot Vision (CRV) Proceedings (p 230 – 236), Halifax, Canada. Abstract: In tele-presence systems, direct face-to-face contact, is essential for emotional communication as it carries non-verbal clues. In commercial products, face-to-face contact is approximated by using either a large semi-transparent mirror to project an image…